Cuprinol Wood Preserver Clear (BP)

Cuprinol Wood Preserver Clear is a colourless general-purpose preserver for exterior use. It gives deep penetrating protection to sound wood against decay, mould and blue-staining fungi. This is a quick drying and low odour formula which is much easier to clean just with water from brushes and therefore more pleasant and convenient to use. To be used with a top coat for weather proof.

This product is currently out of stock and unavailable.

 

  • 14 day easy returns
Guaranteed Safe Checkout

Description

Cuprinol Wood Preserver Clear (BP)

Cuprinol Wood Preserver Clear is a colourless general-purpose preserver for exterior use. It gives deep penetrating protection to sound wood against decay, mould and blue-staining fungi. This is a quick drying and low odour formula which is much easier to clean just with water from brushes and therefore more pleasant and convenient to use. To be used with a top coat for weather proof.

Key Information:

  • Features: Actively prevents rot, decay and blue stain, 5-year colour performance & quick-drying.
  • Coverage:
    1L covers up to 5m² with 2 coats.
    2.5L covers up to 12.5m² with 2 coats.
    5L covers up to 25m² with 2 coats.
    Coverage can vary depending on application method and the condition and nature of the surface.

Tips & Advice:

  • Apply
    Apply 2-3 uniform coats with a brush which has been dipped for at least 3 minutes, if practical. Apply the second coat after the first has soaked in. This product may take 1-5 days to dry fully under typical conditions. The application of this product may cause darkening of some timbers. If colour is critical try a test area to ensure acceptable appearance. To ensure thorough protection, treat all surfaces. Apply to any surfaces cut after treatment. After drying, glues, fillers, mastics and knotting can be used normally. Ensure wood is fully dry (allow 6-8 weeks), or use a vapour barrier such as heavy duty polythene (as used for damp proof membrane), before laying plastic floor coverings, rubber backed carpets or underlay, hanging vinyl wallpaper or using mastics. Do not spill on asphalt, bitumen, bitumen felt, tar, plaster, plastics, paint, etc. Where required, finishes (solvent-based or water-based paints, varnishes, woodstains and polishes, etc.) can be applied normally to treated wood after the preserver has dried (normally 1-5 days for brush or 3 minute dip, but may be longer in cold weather).
  • Dry:
  • Clean:
For further information please call our Paint department by clicking here.

Additional information

Delivery Time

Size

, ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.